LaserPecker Material Settings for Engraving & Cutting Machines

LaserPecker's laser machines can engrave and cut a wide variety of materials. From thin paper to tough metal, LaserPecker machines are always up to the task.

To check LaserPecker's material settings, choose your laser machine model first, followed by the available materials. Then, you'll get suggestions for setting up your machine, including the modes, power levels, and depths.

*Please note that while the table provides recommended parameters, you have the flexibility to customize these settings based on your specific engraving and cutting needs and personal preferences.

Below are the recommended parameters for the LP4 firmware version prior to V655!

   LP4 2W 1064nmLP4 10W 450nm
MaterialProcessingResolutionPower(%) / Depth(%) Power(%) / Depth(%) 
Aluminum Oxide Fill1k100 / 10 100 / 10 

2k50 / 10 50 / 10 
4k20 / 5 50 /  5 
Picture1k60 / 3 90 / 10 
2k50 / 3 40 / 10 
4k50 / 10 10 / 10 
Line Engraving1k100 / 10 100 / 10
2k//
4k//
Stainless SteelFill1k100 / 40 100 / 40 
2k50 / 50 30 / 20 
4k10 / 10 /
Picture1k50 / 40 /
2k50 / 50 /
4k100 / 20 /
Line Engraving1k100 / 20 100 / 40 
2k//
4k//
SteelFill1k5 / 10 60 / 30
2k5 / 530 / 20
4k40 / 4010 / 10
Picture1k100 / 10080 / 50
2k100 / 10070 / 30
4k95 / 1550 / 20
Line Engraving1k10 / 560 / 30
2k//
4k//
CopperFill1k50 / 10 /
2k80 / 5/
4k10 / 5 /
Picture1k100 / 40 /
2k10/ 60/
4k80 / 50/
Line Engraving1k50 / 10/
2k//
4k//
TitaniumFill1k50 / 10 /
2k30 / 30/
4k10 / 10/
Picture1k100 / 80/
2k100 / 50/
4k80 / 10/
Line Engraving1k50 / 10/
2k//
4k//
TungstenFill1k70 / 70 /
2k50 / 10 /
4k30 / 5/
Picture1k100 / 100 /
2k50 / 20 /
4k30 / 10 /
Line Engraving1k100 / 70 100 / 70 
2k//
4k//