A Close Look at LaserPecker LP4's Engraving Area

Part 1. Ellipse Engraving

160 mm × 120 mm

Laser Type: 450 nm Blue Laser

Material: Cork Coaster

Mode: Gcode

Settings: Power: 100%, Depth: 70%, Pass: 1

160 mm × 120 mm

Laser Type: 1064 nm Infrared Laser

Material: Coated Metal

Mode: Gcode

Settings: Power: 100%, Depth: 80%, Pass: 1

Part 2. Engraving with Rotary Extension

160 mm × 402 mm (perimeter)

Laser Type: 1064 nm Infrared Laser

Material: Coated Metal

Mode: Dithering

Settings: Power: 30%, Depth: 30%, Pass: 1

Part 3. Engraving with Slide Extension

160 mm × 300 mm

Laser Type: 1064 nm Infrared Laser

Material: Coated Metal

Mode: Dithering

Settings: Power: 40%, Depth: 20%, Pass: 1

The following video will directly show three distinct scenarios regarding the engraving areas. If you have further questions or suggestions regarding the LP4's engraving area, please feel free to comment below.